1. Home
  2. Controllers, amplifiers, RF and WiFi systems for LED lighting
  3. Amplifiers for LED lighting

Amplifier for RGB LED strip 3X10A, 360W (12V DC), 12-24V DC

Aрт. № RGBAMP30A
Amplifier for RGB LED strip 3X10A, 360W (12V DC), 12-24V DC
Amplifier for RGB LED strip 3X10A, 360W (12V DC), 12-24V DC

Amplifier for RGB LED strip 3X10A, 360W (12V DC), 12-24V DC

Art № RGBAMP30A
description:

The amplifiers for LED strips are used in the cases whenever the aim is to simultaneously control many light groups or lines. The new Ultralux amplifier RGBAMP30A uses 12-24 V DC, has a larger output power and following advantages:

  • Very high output power 360W (12V DC), 720W (24 V DC).
  • Wide operational voltage range 12 - 24 V DC.
  • Suitable for both RGB and single-color lighting (it could also work as three single-color amplifiers).
  • Used for PWM dimming and control.
  • The low consumption allows a connection of countless number of amplifiers.
  • Input-output quick connection terminals
  • Metal housing for better heat dissipation. 
  • The requirements regarding the power supply of the amplifiers are the same as for the LED strips. The supply must be stabilized, with an EMC filter and enough power. 
  • Contains components only from reliable manufacturers. 
  • Compatible with all the Ultralux PWM controllers for RGB and single-color lighting. 

Important: Do not install on flammable surfaces. Do not cover the device, leave enough room for cooling! 

specifications:
Maximum power 360/720W
Voltage DC 12/24V
Max output current 3x10A
Protection rating IP20
Working temperature range -20 °C ÷ +60 °C
Dimensions 91/88/24mm
Control type input signal from the controller
Warranty 2 years
Type of lighting RGB
description:

The amplifiers for LED strips are used in the cases whenever the aim is to simultaneously control many light groups or lines. The new Ultralux amplifier RGBAMP30A uses 12-24 V DC, has a larger output power and following advantages:

  • Very high output power 360W (12V DC), 720W (24 V DC).
  • Wide operational voltage range 12 - 24 V DC.
  • Suitable for both RGB and single-color lighting (it could also work as three single-color amplifiers).
  • Used for PWM dimming and control.
  • The low consumption allows a connection of countless number of amplifiers.
  • Input-output quick connection terminals
  • Metal housing for better heat dissipation. 
  • The requirements regarding the power supply of the amplifiers are the same as for the LED strips. The supply must be stabilized, with an EMC filter and enough power. 
  • Contains components only from reliable manufacturers. 
  • Compatible with all the Ultralux PWM controllers for RGB and single-color lighting. 

Important: Do not install on flammable surfaces. Do not cover the device, leave enough room for cooling! 

More from this category