1. Home
  2. Controllers, amplifiers, RF and WiFi systems for LED lighting
  3. 2.4G smart lighting system

Smart 2.4G RF rotatable remote control for LED lighting, 1 zone

Aрт. № SSG1Z
new
Smart 2.4G RF rotatable remote control for LED lighting, 1 zone
Smart 2.4G RF rotatable remote control for LED lighting, 1 zone Smart 2.4G RF rotatable remote control for LED lighting, 1 zone Smart 2.4G RF rotatable remote control for LED lighting, 1 zone Smart 2.4G RF rotatable remote control for LED lighting, 1 zone

Smart 2.4G RF rotatable remote control for LED lighting, 1 zone

Art № SSG1Z
description:
  • Working voltage: 2x AAA batteries (2х1.5 V)
  • Number of control zones: 1
  • Frequency: 2.4 GHz
  • Index of protection: IP20
  • Remote distance: up to. 20 m
  • Dimensions: Ø60 x 35 mm
  • Working temperature: 0⁰ C ÷ +40⁰ C
  • Warranty: 2 years

SSR1Z is an RF touch remote that can control only a group of already paired drivers and power supplies for LED light from the series – SSD1330, SSD40850, SSD1216.

Code learning operation between remote controls: Used to unify system code values or copy a new remote control.

Range of control on 2.4G Smart system is not limited from the range of remote controller. In a large premises, exceeding the range of remote controller, drivers/dimers transmits signal among themselves and inspect the light state for each other. This is possible when distance between drivers/dimers is less than 10 meters.

specifications:
RF frequency 2.4 GHz
Protection rating IP20
Working temperature range -10 °C ÷ +40 °C
Dimensions Ø60/35mm
Battery 2 x AAA
Range 20m на открито
Warranty 2 years
Zones of control 1 zone
description:
  • Working voltage: 2x AAA batteries (2х1.5 V)
  • Number of control zones: 1
  • Frequency: 2.4 GHz
  • Index of protection: IP20
  • Remote distance: up to. 20 m
  • Dimensions: Ø60 x 35 mm
  • Working temperature: 0⁰ C ÷ +40⁰ C
  • Warranty: 2 years

SSR1Z is an RF touch remote that can control only a group of already paired drivers and power supplies for LED light from the series – SSD1330, SSD40850, SSD1216.

Code learning operation between remote controls: Used to unify system code values or copy a new remote control.

Range of control on 2.4G Smart system is not limited from the range of remote controller. In a large premises, exceeding the range of remote controller, drivers/dimers transmits signal among themselves and inspect the light state for each other. This is possible when distance between drivers/dimers is less than 10 meters.

documents:

Related products