LED rigid bar for building-in, 2.5W, 12V DC.
The profile is made of aluminum and is designed to illuminate shelves, wardrobes, and cupboards.
Compatible with the sensors from the range. It is dimmable.
The power cord ends with a connector for easy and quick installation. The profile is suitable for building-in. For this purpose, it is necessary to create a channel with suitable dimensions on the desired surface, indicated in the instructions. The profile should be placed into the channel.
| Power | 2.5W |
| Class | III |
| Voltage DC | 12V |
| Dimmable | yes |
| Rated luminous flux | 160lm |
| Correlated Color Temperature (CCT) | 4000K |
| Color Rendering Index (CRI) | >80 |
| Beam angle | 90⁰ |
| LED type | SMD2835 |
| Protection rating | IP20 |
| Working temperature range | -10 °C ÷ +40 °C |
| On/Off cycles | 15000 |
| Dimensions | 350/18/11mm |
| Lumen Maintenance LM80 | 25000h |
| Starting time | <0.2sec |
| Cable length | 1500mm |
| Warranty | 2 years |
LED rigid bar for building-in, 2.5W, 12V DC.
The profile is made of aluminum and is designed to illuminate shelves, wardrobes, and cupboards.
Compatible with the sensors from the range. It is dimmable.
The power cord ends with a connector for easy and quick installation. The profile is suitable for building-in. For this purpose, it is necessary to create a channel with suitable dimensions on the desired surface, indicated in the instructions. The profile should be placed into the channel.
