LED rigid bar for surface mounting, 2.5W, 12V DC.
The profile is used to illuminate shelves, wardrobes, cabinets. Compatible with the sensors from the range. It is dimmable. The power cord ends with a connector for easy and quick installation.
At both ends of the profile there are holes in which the profile is mounted on the desired surface by means of screws.
| Power | 2.5W |
| Class | III |
| Voltage DC | 12V |
| Dimmable | yes |
| Rated luminous flux | 160lm |
| Correlated Color Temperature (CCT) | 4000K |
| Color Rendering Index (CRI) | >80 |
| Beam angle | 90⁰ |
| LED type | SMD2835 |
| Protection rating | IP20 |
| Working temperature range | -10 °C ÷ +40 °C |
| On/Off cycles | 15000 |
| Dimensions | 350/13/10mm |
| Lumen Maintenance LM80 | 25000h |
| Starting time | <0.2sec |
| Cable length | 1500mm |
| Warranty | 2 years |
LED rigid bar for surface mounting, 2.5W, 12V DC.
The profile is used to illuminate shelves, wardrobes, cabinets. Compatible with the sensors from the range. It is dimmable. The power cord ends with a connector for easy and quick installation.
At both ends of the profile there are holes in which the profile is mounted on the desired surface by means of screws.
